2019

• Biziks V, Bicke S, Militz H (2019) Penetration depth of phenol‑formaldehyde (PF) resin into beech wood studied by light microscopy. In: Wood Sci Technol 53: 165–176, DOI: 10.1007/s00226-018-1058-2


• Biziks V, Van Acker J, Militz H, Grinins J, Van den Bulcke J (2019) Density and density profile changes in birch and spruce caused by thermo-hydro treatment measured by X-ray computed tomography. In: Wood Sci Technol 53 (2): 491–504, DOI: 10.1007/s00226-018-1070-6


• Bollmus S, Bächle L, Militz H, Brischke C (2019) Dauerhaftigkeitsklassifizierung von schutzmittelbehandeltem und modifiziertem Holz. In: Holztechnologie 50 (5): 13-25


• Bollmus S, Beeretz C, Militz H (2019) Tensile and Impact Bending Properties of Chemically Modified Scots Pine. In: Forests 11 (1): 84, DOI: 10.3390/f11010084


• Brischke C, Wegener FL (2019) Impact of water holding capacity and moisture content of soil substrates on the moisture content of ood in terrestrial microcosms. In: Forests 10 (6): 485, DOI: 10.3390/f10060485


• Brischke C, Emmerich L, Nienaber DGB, Bollmus S (2019) Biological durability of sapling-wood products used for gardening and outdoor decoration. In: Forests 10 (12): 1152, DOI: 10.3390/f10121152


• Brischke C, Stricker S, Meyer-Veltrup L, Emmerich L (2019) Changes in sorption and electrical properties of wood caused by fungal decay. In: Holzforschung 73 (5): 445-456, DOI: 10.1515/hf-2018-0171


• Brischke C, Ziegeler N, Bollmus S (2019) Abrasion resistance of thermally and chemically modified timber. In: Drvna Ind 70 (1): 71-76


• Brischke C, Niklewski J, Humar M, Alfredsen G (2019) Modelle zur Vorhersage der Gebrauchsdauer von Holzbauteilen auf dem Prüfstand. In: Holztechnologie 60 (4): 23-34


• Bütün FY, Sauerbier P, Militz H, Mai C (2019) The effect of fibreboard (MDF) disintegration technique on wood polymer composites (WPC) produced with recovered wood particles. In: Coatings 118: 312-316, DOI: 10.1016/j.compositesa.2019.01.006


• Emmerich L, Bollmus S, Militz H (2019) Wood modification with DMDHEU (1.3-dimethylol-4.5-dihydroxyethyleneurea) – State of the art, recent research activities and future perspectives. In: Wood Mater Sci Eng 14 (1): 3-18, DOI: 10.1080/17480272.2017.1417907


• Emmerich L, Wülfing G, Brischke C (2019) The impact of anatomical characteristics on the structural integrity of wood. In: Forests 10 (2): 1-12 (199), DOI: 10.3390/f10020199


• Guo W, Xiao Z, Tang L, Zhang Z, Lv J, Militz H, Xie Y (2019) Activation of glucose with Fenton’s reagent: chemical structures of activated products and their reaction efficacy toward cellulosic material. In: Holzforschung 73 (6): 579–587, DOI: 10.1515/hf-2018-0153


• Hosseinpourpia R, Adamopoulos S, Mai C, Taghiyari HR (2019) Properties of medium-density fibreboards bonded with dextrin-based wood adhesive. In: Wood Res-Slovakia 64 (2): 185-194


• Humar M, Kržišnik D, Lesar B, Brischke C (2019) The performance of wood decking after five years of exposure: Verification of the combined effect of wetting ability and durability. In: Forests 10 (10): 903, DOI: 10.3390/f10100903


• Koddenberg T, Krause KC, Krause A (2019) Tomographic analysis of siliceous particulates in Australian turpentine wood (Syncarpia glomulifera) through X-ray micro-computed tomography. In: Micron 117: 22-28, DOI: 0.1016/j.micron.2018.10.006


• Koddenberg T, Wentzel M, Militz H (2019) Volumetric estimate of bordered pits in Pinus sylvestris based on X-ray tomography and light microscopy imaging. In: Micron 124: 1-8, DOI: 10.1016/j.micron.2019.102704


• Köhler R, Sauerbier P, Ohms G, Viöl W, Militz H (2019) Wood protection through plasma powder deposition—An alternative coating process. In: Forests 10 (10): 898, DOI: 10.3390/f10100898


• Kovryga A, Schlotzhauer P, Stapel P, Militz H, van de Kuilen JW (2019) Visual and machine strength grading of European ash and maple for glulam application. In: Holzforschung 73 (8): 773-787, DOI: 10.1515/hf-2018-0142


• Kramár S, Mayer AK, Schöpper C, Mai C (2019) Use of basalt scrim to enhance mechanical properties of particleboards. In: Constr Build Mater 238: 1-9, DOI: 10.1016/j.conbuildmat.2019.117769


• Krause KC, Brischke C, Koddenberg T, Buschalsky A, Militz H, Krause A (2019) Resistance of injection molded wood-polypropylene composites against basidiomycetes according to EN 15534-1: New insights on the test procedure, structural alterations, and Impact of Wood Source. In: Fibers 7 (10): 92, DOI: 10.3390/fib7100092


• Mubarok M, Dumarcay A, Militz H, Candelier K, Thevenon MF, Gérardin P (2019) Comparison of different treatments based on glycerol or polyglycerol additives to improve properties of thermally modified wood. In: Eur J Wood Wood Prod 77 (5): 799-810, DOI: 10.1007/s00107-019-01429-4


• Mubarok M, Dumarcay S, Militz H, Candelier K, Thévenon MF, Gérardin P (2019) Non-biocide antifungal and anti-termite wood preservation treatments based on combinations of thermal modification with different chemical additives. In: Eur J Wood Wood Prod 77 (6): 1125-1136, DOI: 10.1007/s00107-019-01468-x


• Nelis PA, Henke O, Mai C (2019) Comparison of blockboards with core layers made of kiri (Paulownia spp.) and of spruce (Picea abies) regarding mechanical properties. In: Eur J Wood Wood Prod 77: 323–326, DOI: 10.1007/s00107-019-01381-3


• Nelis PA, Mai C (2019) Improved strength properties of three-layered particleboards with different core and surface layers based on kiri wood (Paulownia spp.). In: Eur J Wood Wood Prod 77 (5): 761-769


• Niklewskia J, Brischke C, Frühwald Hanssona E (2019) Numerical study on the effects of macro climate and detailing on the relative decay hazard of Norway spruce. In: Wood Mater Sci Eng -: 1-9, DOI: 10.1080/17480272.2019.1608296


• Renner G, Sauerbier P, Schmidt TC, Schram J (2019) Robust automatic identification of microplastics in environmental samples using FTIR microscopy. In: Anal Chem 91 (15): 9656-9664, DOI: 10.1021/acs.analchem.9b01095


• Schlotzhauer P, Ehrmann A, Bollmus S, Militz H (2019) Critical discussion of perpendicular to grain tension testing of structural timber - case study on the European hardwoods ash, beech and maple. In: Wood Mater Sci Eng (online): 1-11, DOI: 10.1080/17480272.2019.1596157


• Schlotzhauer P, Kovryga A, Emmerich L, Bollmus S, Van de Kuilen JW, Militz H (2019) Analysis of economic feasibility of ash and maple lamella production for glued laminated timber. In: Forests 10 (7): 529, DOI: 10.3390/f10070529


• Sharapov E, Brischke C, Militz H, Toropov A (2019) Impact of drill bit feed rate and rotational frequency on the evaluation of wood properties by drilling resistance measurements. In: Int Wood Prod J (online): 1-11, DOI: 10.1080/20426445.2019.1688455


• Sharapov E, Brischke C, Militz H, Smirnova E (2019) Prediction of modulus of elasticity in static bending and density of wood at different moisture contents and feed rates by drilling resistance measurements. In: Eur J Wood Wood Prod 77 (5): 833-842, DOI: 10.1007/s00107-019-01439-2


• Ten Bosch L, Huber A, Sauerbier P, Köhler R, Avramidis G, Viöl W (2019) Effects of newly devised plasma lice comb on human hair. In: Plasma Sci Technol 21: 1-12 (125502), DOI: 10.1088/2058-6272/ab428b


• Treu A, Zimmer K, Brischke C, Larnøy E, Ross L, Aloui F, Cragg SM, Fl PO, Westin M, Borges L, Williams J (2019) Durability and Protection of Timber Structures in Marine Environments in Europe: An Overview. In: Bioresources 14 (4): 1-24, DOI: 10.15376/biores.14.4.Treu


• Ugovšek A, Šubic B, Starman J, Rep G, Humar M, Lesar B, Thaler N, Brischke C, Meyer-Veltrup L, Jones D, Häggström U, Lozano JL (2019) Short term performance of wooden windows and facade elements made of thermally modified and non-modified Norway spruce in different natural environments. In: Wood Mater Sci Eng 14 (1): 24-32, DOI: 10.1080/17480272.2018.1438512


• Wentzel M, Brischke C, Militz H (2019) Dynamic and static mechanical properties of Eucalyptus nitens thermally modified in an open and closed reactor system. In: Maderas-Cienc Tecnol 21 (2): 141-152, DOI: 10.4067/S0718-221X2019005000201


• Wentzel M, Fleckenstein M, Hofmann T, Militz H (2019) Relation of chemical and mechanical properties of Eucalyptus nitens wood thermally modified in open and closed systems. In: Wood Mater Sci Eng (3): 165-173, DOI: 10.1080/17480272.2018.1450783


• Wentzel M, González-Prieto Ó, Brischke C, Militz H (2019) Physico-Mechanical Properties of Thermally Modified Eucalyptus Nitens Wood for Decking Applications. In: Drvna Ind 70 (3): 235-245


• Wentzel M, Koddenberg T, Militz H (2019) Anatomical characteristics of thermally modified Eucalyptus nitens wood in an open and closed reactor system. In: Wood Mater Sci Eng -: 1-6, DOI: 10.1080/17480272.2019.1572649


• Wentzel M, Rolleri A, Pesenti H, Militz H (2019) Chemical analysis and cellulose crystallinity of thermally modified Eucalyptus nitens wood from open and closed reactor systems using FTIR and X-ray crystallography. In: Eur J Wood Wood Prod 77 (4): 517-525, DOI: 10.1007/s00107-019-01411-0


• Xiao Z, Chen H, Mai C, Militz H, Xie Y (2019) Coating performance on glutaraldehyde-modified wood. In: J Forestry Res 30 (1): 353–361, DOI: 10.1007/s11676-018-0620-y