Holzbiologie und Holzprodukte

2020



  • Altgen M, Altgen D, Klüppel A, Rautkari L (2020) Effect of curing conditions on the water vapor sorption behavior of melamine formaldehyde resin and resin-modified wood. J Mater Sci 55 (25): 11253-11266, doi: 10.1007/s10853-020-04814-0

  • Altgen M, Awais M, Altgen D, Klüppel A, Mäkelä M, Rautkari L (2020) Distribution and curing reactions of melamine formaldehyde resin in cells of impregnation-modified wood. Sci Rep 10 (1): 3366, doi: 10.1038/s41598-020-60418-3

  • Biziks V, Fleckenstein M, Mai C, Militz H (2020) Suitability of a lignin-derived mono-phenol mimic to replace phenol in phenol-formaldehyde resin for use in wood treatment. Holzforschung 74 (4): 344-350, doi: 10.1515/hf-2019-0061

  • Bollmus S, Beeretz C, Militz H (2020) Tensile and impact bending properties of chemically modified Scots pine. Forests 11 (1): 12, doi: 10.3390/f11010084

  • Brischke C (2020) Wood protection and preservation. Forests 11 (5): 549, doi: 10.3390/f11050549

  • Brischke C, Gobakken LR (2020) Protecting wood infrastructure and mass timber buildings. Wood Mater Sci Eng 15 (6): 325-325, doi: 10.1080/17480272.2020.1799242

  • Brischke C, Selter V (2020) Mapping the decay hazard of wooden structures in topographically divergent regions. Forests 11 (5): 510, doi: 10.3390/f11050510

  • Brischke C, Bollmus S, Braun M, Emmerich L (2020) Folienlagerung von Käferholz. Holz-Zentralblatt 146 (15): 296-297

  • Brischke C, Grünwald L, Bollmus S (2020) Effect of size and shape of specimens on the mass loss caused by Coniophora puteana in wood durability tests. Eur J Wood Wood Prod 78 (4): 811-819, doi: 10.1007/s00107-020-01559-0

  • Brischke C, Alfredsen G (2020) Wood-water relationships and their role for wood susceptibility to fungal decay. Appl Microbiol Biot 104(9): 3781-3795, doi: 10.1007/s00253-020-10479-1

  • Emmerich L, Militz H (2020) Study on the impregnation quality of rubberwood (Hevea brasiliensis Müll. Arg.) and English oak (Quercus robur L.) sawn veneers after treatment with 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU). Holzforschung 74 (4): 362-371, doi: 10.1515/hf-2019-0110

  • Emmerich L, Altgen M, Rautkari L, Militz H (2020) Sorption behavior and hydroxyl accessibility of wood treated with different cyclic N-methylol compounds. J Mater Sci 55 (35): 16561-16575, doi: 10.1007/s10853-020-05224-y

  • Emmerich L, Brischke C, Sievert M, Schulz MS, Jaeger AC, Beulshau A, Humar M (2020) Predicting the outdoor moisture performance of wood based on laboratory Indicators. Forests 11 (9): 1001, doi: 10.3390/f11091001

  • Emmerich L, Militz H, Brischke C (2020) Long-term performance of DMDHEU-treated wood installed in different test set-ups in ground, above ground and in the marine environment. International Wood Products Journal 11 (1): 27-37, doi: 10.1080/20426445.2020.1715553

  • Ghavidel A, Hosseinpourpia R, Militz H, Vasilache V, Sandu I (2020) Characterization of archaeological European White elm (Ulmus laevis P.) and Black poplar (Populus nigra L.). Forests 11 (12): 1329, doi: 10.3390/f11121329

  • Hermann R, Steinhoff J, Schlotzhauer P, Vana P (2020) Breaking News! Making and testing Bronze Age balance scales. Journal of Archaeological Science: Reports 32: 102444, doi: 10.1016/j.jasrep.2020.102444

  • Humar M, Repič R, Kržišnik D, Lesar B, Cerc Korošec R, Brischke C, Emmerich L, Rep G (2020) Quality control of thermally modified timber using dynamic vapor sorption (DVS) analysis. Forests 11 (6): 666, doi: 10.3390/f11060666

  • Kirker GT, Brischke C, Passarini L, Zelinka SL (2020) Salt damage in wood: controlled laboratory exposures and mechanical property measurements. Wood Fiber Sci 52 (1): 44-52, doi: 10.22382/wfs-2020-005

  • Koddenberg T, Zauner M, Militz H (2020) Three-dimensional exploration of soft-rot decayed conifer and angiosperm wood by X-ray micro-computed tomography. Micron 134: 102875, doi: 10.1016/j.micron.2020.102875

  • Krause K, Krause A, Pilz SE, Brischke C (2020) High-energy multiple impact (HEMI) tests of wood–polypropylene composites: new insights in structural integrity. Wood Mater Sci ENG 0: 1-4, doi: 10.1080/17480272.2020.1737962

  • Maaß MC, Saleh S, Militz H, Volkert CA (2020) The structural origins of wood cell wall toughness. Adv Mater 32 (16): 1907693, doi: 10.1002/adma.201907693

  • Marais BN, Brischke C, Militz H (2020) Wood durability in terrestrial and aquatic environments – A review of biotic and abiotic influence factors. Wood Mater Sci Eng 0: 1-24, doi: 10.1080/17480272.2020.1779810

  • Marais BN, Brischke C, Militz H, Peters JH, Reinhardt L (2020) Studies into fungal decay of wood in ground contact—Part 1: The influence of water-holding capacity, moisture content, and temperature of soil substrates on fungal decay of selected timbers. Forests 11 (12): 1284, doi: 10.3390/f11121284

  • Militz H (2020) Wood modification research in Europe. Holzforschung 74 (4): 333-333, doi: 10.1515/hf-2020-0050

  • Mubarok M, Militz H, Darmawan IW, Hadi YS, Dumarçay S, Gérardin P (2020) Resistance against subterranean termite of beech wood impregnated with different derivatives of glycerol or polyglycerol and maleic anhydride followed by thermal modification: a field test study. Eur J Wood Wood Prod 78 (2): 387-392, doi: 10.1007/s00107-020-01503-2

  • Mubarok M, Militz H, Dumarçay S, Gérardin P (2020) Beech wood modification based on in situ esterification with sorbitol and citric acid. Wood Sci Technol 54 (3): 479-502, doi: 10.1007/s00226-020-01172-7

  • Sauerbier P, Köhler R, Renner G, Militz H (2020) Plasma treatment of polypropylene-based wood–plastic composites (WPC): Influences of working gas. Polymers 12 (9): 1933, doi: 10.3390/polym12091933

  • Sauerbier S, Köjler R, Renner G, Militz H (2020) Surface activation of polylactic acid-based wood-plastic composite by atmospheric pressure plasma treatment. Materials 13 (20): 4673, doi: 10.3390/ma13204673

  • Schlotzhauer P, Ehrmann A, Bollmus S, Militz H (2020) Critical discussion of perpendicular to grain tension testing of structural timber - case study on the European hardwoods ash, beech and maple. Wood Mater Sci Eng 15 (5): 278-288, doi: 10.1080/17480272.2019.1596157

  • Sharapov E, Brischke C, Militz H (2020) Assessment of Preservative-Treated Wooden Poles Using Drilling-Resistance Measurements. Forests 11 (20): 1-11, doi: 10.3390/f11010020

  • Sharapov E, Brischke C, Militz H, Smirnova E (2020) Combined effect of wood moisture content, drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce (Picea abies (L.) Karst.). Wood Mater Sci Eng 15 (4): 198-204, doi: 10.1080/17480272.2018.1557249

  • Söftje M, Koddenberg T, Militz H, Drafz M, Namyslo J, Kaufmann D (2020) Chemistry and spectroscopy of renewable materials, part 2: Investigation of suitably esterified wood regarding penetration and distribution of the chemically modifying reagent by means of high-resolution 3D computed tomography. Acs Sustain Chem Eng 8 (19): 7353-7358, doi: 10.1021/acssuschemeng.0c01574

  • Taghiyari H, Esmailpour A, Majidi R, Morrell JJ, Mallaki M, Militz H, Papadopoulos AN (2020) Potential use of wollastonite as a filler in UF resin based medium-density fiberboard (MDF). Polymers 12 (7): 1435, doi: 10.3390/polym12071435

  • Taghiyari HR, Bayani S, Militz H, Papadopoulos AN (2020) Heat treatment of pine wood: possible effect of impregnation with silver nanosuspension. Forests 11 (4): 466, doi: 10.3390/f11040466

  • Wentzel M, Koddenberg T, Militz H (2020) Anatomical characteristics of thermally modified Eucalyptus nitens wood in an open and closed reactor system. Wood Mater Sci Eng 15 (4): 223-228, doi: 10.1080/17480272.2019.1572649